Configure your precisionMolding
Clamping / Injection unit
Options
Your precisionMolding
Clamping unit
Clamping Force (kN):
Clearance between tie bars horizontal (mm):
Clearance between tie bars vertical (mm):
Size of mold platen horizontal (mm):
Size of mold platen vertical (mm):
Maximum mold weight (kg):
Injection unit
Screw diameter (mm)
Ls/D-ratio:
Injection pressure (bar):
Stroke volume (cm3):
Shot weight (g):
Injection rate (cm3/s):
Plasticizing rate (g/s):
General Data
Connected load (kW):
Circuit breaker (A):
Dry cycle time / stroke (EUROMAP 6) (s/mm):
Dimensions and weight
Length x Width x Height (m):
Net weight (t):
Oil reservoir capacity (dm3):
Mold height
Mold height min-max
Opening width
Mold height min-max (mm):
Opening width (mm):
Electric Ejector
Ejector drive
Ejector force
Ejector speed
Ejector force forward (kN):
Ejector force backward (kN):
Ejector speed (mm/s):
Injection unit
Injection speed (mm/s)
Screw driving capacity
Nozzle pressure
Injection speed (mm/s):
Injection rate (g/s):
Screw speed (1/min):
Plasticizing rate (g/s):
Plasticizing torque (Nm):
Nozzle pressure (kN):
Automation
X-axis (mm):
Y-axis (mm):
Z-axis (mm):
Payload (kg):
max. velocity x-axis (m/s):
max. velocity Y-axis (m/s):
max. velocity z-axis (m/s):
Torque C wrist axis (Nm):
Summary of your configuration
Clamping unit:
Clamping Force (kN):
Clearance between tie bars horizontal (mm):
Clearance between tie bars vertical (mm):
Size of mold platen horizontal (mm):
Size of mold platen vertical (mm):
Injection unit:
Injection speed (mm/s):
Plasticizing rate (g/s):
Plasticizing torque (Nm):
Injection rate (g/s):
Screw speed (1/min):
Nozzle pressure (kN):
Mold height
Mold height min-max (mm):
Opening width (mm):
Ejector speed
Ejector force forward (kN):
Ejector force backward (kN):
Ejector speed (mm/s):
Automation:
None
X-axis (mm):
Y-axis (mm):
Z-axis (mm):
Payload (kg):
max. velocity x-axis (m/s):
max. velocity Y-axis (m/s):
max. velocity z-axis (m/s):
Torque C wrist axis (Nm):
Your selection
-
Clamping unitClamping force (kN):Clearance between tie bars horizontal (mm):Clearance between tie bars vertical (mm):Size of mold platen horizontal (mm):Size of mold platen vertical (mm):
Injection unitStroke volume (cm3):Injection pressure (bar):Injection speed 1 (mm/s):Nozzle pressure (kN): -
Clamping unitInjection unitMold heightDefaultMold height, min.:Mold height, max.:Opening width:Electric EjectorelectricEjector force forward (kN):Ejector force backward (kN):Ejector speed:Injection unitInjection speed (mm/s):Injection rate (g/s):Screw speed (1/min):Plasticizing rate (g/s):Plasticizing torque (Nm):Nozzle pressure (kN):AutomationNoneX-axis (mm) Mold release stroke:Y-axis (mm) Vertical stroke:Z-axis (mm) Discharge stroke:Payload (kg):max. velocity x-axis (m/s):max. velocity Y-axis (m/s):max. velocity z-axis (m/s):Torque C wrist axis (Nm):
-